A single-layer PDMS-on-silicon hybrid microactuator with multi-axis out-of-plane motion capabilities-part II: fabrication and characterization

This paper reports on fabrication and characterization of a new electrostatic microactuator that achieves out-of-plane multi-axis motion with a single silicon device layer. The multi-axis motion with the simple actuator design is possible by incorporating a three-dimensional (3-D) polydimethylsiloxane (PDMS) microstructure. This paper develops a new device processing method named "Soft-Lithographic Lift-Off and Grafting (SLLOG)" to fabricate the previously designed PDMS-on-silicon hybrid actuator structure. SLLOG is a low-temperature (less than 150/spl deg/C) process that allows replica molded PDMS microstructures to be integrated in silicon micromachined device patterns. The fabricated actuator is characterized using laser vibrometry. The experimental results demonstrate actuation motions achieved in three independent axes with fast dynamic response reaching a bandwidth of about 5 kHz. The fabricated PDMS-on-silicon actuator yields a vertical displacement up to 5 /spl mu/m and rotational motions with a 0.6-/spl deg/ tilting angle at a 40-V peak-to-peak ac actuation voltage.