Effect of water on flue gas cleaning and the discharge characteristics

To clarify the influence of water on discharge characteristics, water was put in the plasma reactor as electrode and the current and voltage characteristics of corona discharge were investigated under the application of dc voltage. Two different types of electrode systems (needle to plane, needle to water) were used. In the case when DC high voltage was applied to the needle electrode, corona of the same polarity with the voltage applied to the needle was observed. The experimental results show both the removal rate of NO and SO/sub 2/ are improved in the needle to water reactor than that of needle to plane reactor. NO is mostly oxidized into NO/sub 2/ by the reaction with O and O/sub 3/ and NO/sub 2/ is change into HNO/sub 3/ by the reaction with OH, which is generated from H/sub 2/O. Most of the SO/sub 2/ removal is attributed to the absorption into the water.