High efficiency silicon x-ray detectors

Thick silicon multi-cathode detectors (SMCD) for high efficiency x-ray detection have been designed, fabricated and tested. These thick detectors (up to 1.5 mm thick) extend the practical x-ray detection range from the current level of /spl sim/20 keV, up to /spl sim/40 keV, while still maintaining the low noise and high count rate performance of the thinner (/spl sim/0.3 mm) SMCD technology. The increase in x-ray detection efficiency at higher energies will have a significant impact on practical uses of these detectors in a wide variety of x-ray fluorescence (XRF) applications. In addition to increasing the detection efficiency for x-rays, the thick silicon detectors will offer improved efficiency for high energy electrons, alphas and other light particles in nuclear physics and astrophysics applications. Very high resistivity float zone material was used for the substrates to minimize the operating voltages required. Multi-guard ring structures were designed to prevent the premature breakdown of the devices at the voltages required to fully deplete the thick detectors. We have measured 172 eV and 158 eV FWHM energy resolution at 5.9 keV (at 4 /spl mu/s and 12 /spl mu/s peaking time, respectively, -55/spl deg/C) on 1 mm thick prototype detectors. Spectral performance, energy resolution, efficiency and count rate performance are presented.