Cryogenic design of termination cryostat for HTS power cable

A high temperature superconducting (HTS) power cable system cooled by forced-circulation subcooled liquid nitrogen is under construction in Korea. In the system, the termination cryostat designed for normal capacity of 22.9 kV, 1.26 kA is located at each end. In order to cool the cryostat effectively, we conducted several numerical analyses. It was found that major design factors were position of inlet and outlet for the liquid nitrogen as well as mass flow rate of the liquid nitrogen in the cryostat. It was also found based on the calculation of temperature distributions in the cryostat that the mass flow rate of liquid nitrogen is needed at least 0.2 kg/s. The cryostat was designed to endure the mechanical stress induced by thermal shrinkage from room temperature to liquid nitrogen temperature. The cryostat is being installed in the 30 m length, prototype single phase HTS cable system.