Reliability properties of low voltage PZT ferroelectric capacitors and arrays

We report on the reliability properties of a high-density ferroelectric memory based on a 70nm thick MOCVD PZT process technology. We observe that the polycrystalline texture plays an important role in the electrical and reliability properties of these thin films. Data retention loss is primarily due to the imprint effect, which shows a 1.5eV "Time-to-Fail" activation energy. Good correlation is observed between stand alone test capacitors and memory arrays integrated into a 130nm, 5LM, Cu/FSG logic CMOS process. Excellent bit endurance properties are observed on fully packaged memory arrays, with no degradation up to 10/sup 13/ read/write cycles.