A design study for the basic TEM horn antenna

In this paper, a design study was performed for the basic TEM horn antenna. In the theoretical model, care was taken to avoid the problems associated with the use of gap sources when calculating the reflection coefficient and input impedance of the antenna. All numerical calculations were made with a program based on the method of moments, and the accuracy of the numerical calculations was established with measured results for selected antennas. The transverse electromagnetic (TEM) horn antenna is a popular broadband antenna. The basic antenna has a simple design consisting of two triangular plates and a feeding structure. The horn is described completely by only three variables: /spl alpha/, /spl beta/, and s. /spl alpha/ is the angular width of each plate, /spl beta/ is the angular separation between the two plates, and s is the length, measured from the drive point to the corner of the plate. The geometry of the basic TEM horn antenna does not require a particular choice of a feeding method.