A novel pole-zero compensation scheme using unbalanced differential pairs

The main problem in extending continuous-time filtering to higher frequencies is the sensitivity of high-frequency filters to analog integrator nonidealities such as finite dc gain and parasitic poles. The use of a cascode stage introduces internal nodes, and hence a nondominant pole, in the signal path. This has been overcome using a novel phase compensation scheme which does not require tuning of the compensating element, and is itself unaffected by tuning of the integrator's unity-gain frequency or quality factor. The scheme is based upon a MOS version of the "multi-tanh principle" where the linear range of a transconductor is divided between at least two unbalanced differential pairs operating in parallel. The common-source node of an unbalanced differential pair is not ac ground and the associated pole-zero pair may be harnessed to cancel the parasitic pole introduced by the cascode stage. The feasibility of the proposed design was evaluated with the fabrication of a test-chip on a 0.25 /spl mu/m 2.5 V standard digital CMOS process. Measurements confirm that the group delay response is flat ( /spl plusmn/2%) over a five octave frequency range (3.5-112 MHz or 0.058-1.87f/sub c/).