Computation of TM and TE modes in waveguides based on a surface integral formulation

The surface integral formulation is used for the computation of TM and TE modes propagating in dielectric loaded waveguides. This formulation makes use of the surface equivalence principle whereby the field at any point internal or external to the waveguide can be expressed in terms of equivalent surface currents. This procedure reduces the original problem into a set of integro-differential equations which is then reduced to a matrix equation using the method of moments. The solution of this matrix equation provides the propagation characteristics of the waveguide and the equivalent surface currents existing on the waveguide walls. The equivalent surface currents can be used to compute the fields at all points, both inside and outside the waveguide. The surface integral method has been used to compute the propagation characteristics of waves propagating in dielectric loaded waveguides. The computed results agree very well with analytical and published data. A method that can be used to remove spurious modes is illustrated.<
>