Reducing grating lobes due to subarray amplitude tapering

Subarray amplitude tapering is a simple, lower cost method to generate low sidelobes in an antenna's far-field pattern. Unfortunately, this simple technique also generates unwanted grating lobes. Placing the exact amplitude taper at the element outputs produces the desired far-field pattern, but the feed architecture is complicated and expensive. An alternative to these two techniques is described. A trade-off exists between sidelobe performance and simplicity of design. This trade-off consists of amplitude tapering the subarray outputs and the element outputs in such a way that the element amplitude tapers are identical for every subarray. In this way, the amplitude taper approximates the desired taper much better than subarray tapering alone, yet all the subarrays are identical. Thus, the feed design remains very simple.