Far-field accuracy investigation using modulated scattering technique for fast near-field measurements

Near field measurement techniques in conjunction with near-field to far-field transformation algorithms are widely used today. Two of the most important concerns are, firstly, the degree of accuracy achieved, and secondly, the measurement duration. Although high degrees of accuracy can be obtained, the time required to scan completely the near field of an antenna using the classical near-field measurement techniques is rather long. The modulated scattering technique would offer a means to reduce this time by a factor of 10 to 100 while maintaining a reasonable degree of accuracy. Using this technique, however, one introduces further sources of inaccuracy such as the mutual coupling between the elements of the array used to probe the test antenna, and the further limitation of the available measurement dynamic range. In this paper, these two sources of inaccuracy inherent in this technique or other techniques which use a similar set-up, are explored. Multiple reflections between the test antenna and the probe array are ignored. A parabolic reflector is chosen as the test antenna, and an array of dipoles is chosen as the probe antenna in the numerical simulation.