A Single-Input Bipolar-Output (SIBO) DC–DC Boost Converter for Solar Generators and On-Chip Power Delivery: Modeling and Experimental Assessment of the So-Called Perilla Converter

Hybrid power converters that cascade switched-capacitor stages with conventional LC-based DC/DC switching converters have recently emerged as promising solutions for applications requiring a bipolar DC bus, such as photovoltaic systems and in-chip OLED drivers. However, despite clear advantages in efficiency, compactness, and implementation simplicity, their adoption has been limited due to the lack of accurate modeling and experimental validation. Traditional modeling techniques often fail to capture the static and dynamic behavior of these hybrid topologies. Some previous works either neglected capacitive losses or relied on empirical equivalent models without a clearly defined methodology. The Perilla SIBO (Single-Input Bipolar-Output) Boost Converter is a representative example of this new class of hybrid converters, integrating a conventional Single-Inductor Single-Output (SISO) boost stage with a switched-capacitor inverter. In earlier work, a static model for the Perilla Boost converter was derived using the small-ripple approximation and charge balance principles, assuming matched output capacitors and balanced load conditions—but without considering efficiency estimation. This paper extends the previous model to account for unbalanced loading and mismatched output capacitances and introduces a novel analytical expression to estimate converter efficiency. A comprehensive static modeling and experimental evaluation is presented under realistic operating conditions. The model is validated using a prototype operating across an input voltage range of 3 V to 10 V and delivering output power between 1 W and 20 W. The proposed model achieves a mean absolute percentage error of 5.76% and a standard deviation of 5.68%, offering a reliable tool for steady-state performance prediction. The dynamic modeling of the converter, as well as the development of a systematic design methodology, are beyond the scope of this work.