Multirate Filtering for Pulsatile Bioimpedance Signals with MHz Excitation

Pulsatile bioimpedance measurements require filters with very narrow bandwidths to preserve heartbeat-rate modulation while suppressing excess noise. At the signal's carrier frequency, this demands an impractically-high-Q filter. Multirate signal processing is an attractive solution to this problem, as it provides an avenue to extract the signals of interest practically. This paper presents a multirate filtering solution and shows step-by-step how the bioimpedance data of interest are extracted from noise and excitation frequency in in-phase and quadrature signals acquired from an analog measurement circuit. The tested impedance values resemble realistic human tissue impedance, demonstrating the method's ability to measure a human pulse within an approximately $50-\text{Hz}$ bandwidth at a $1-\text{MHz}$ carrier. This method is useful for high-Q bioimpedance measurements where interest lies in the details of signals pulsing at the rate of a beating human heart.