Secure Integrated Sensing and SWIPT via Active IRS

To achieve sustainable communication and sensing, simultaneous wireless information and power transfer (SWIPT) has been introduced into integrated sensing and communication (ISAC). However, this combination brings significant security challenges due to signal multiplexing and spectrum sharing. In this paper, an active intelligent reflecting surface (IRS) assisted secure integrated sensing and SWIPT system is proposed with the power splitting (PS) model adopted. To maximize the harvested power while satisfying the constraints of sidelobe level ratio and secrecy rate, a problem is formulated to jointly optimize the transmit beamforming, artificial noise (AN) vectors, PS ratios, and amplification factors and phase shifts of active IRS, which is difficult to solve due to the coupled variables. To this end, we decompose it into two sub-problems, and propose two alternating optimization (AO) algorithms to solve them. First, an AO algorithm based on semi-definite relaxation (SDR) is developed. Specifically, we develop a two-layer algorithm to obtain the transmit beamforming matrix, AN covariance matrix and PS ratios, and utilize the penalty-based method to design the coefficients of active IRS. To reduce the complexity caused by the high-dimensional matrix operation of SDR, an AO algorithm based on successive convex approximation (SCA) is proposed, which can approximate the original problem as a sequence of convex counterparts via the first-order Taylor expansion. Simulation results show that the SCA-based AO algorithm can achieve the performance close to that of SDR with lower complexity.