A Digital Approach to Symbol Timing Recovery Systems

An analysis of a symbol timing recovery (STR) technique using digital processing is presented. The ratio of the discrete spectral power at the symbol rate frequency to the nearby continuous spectral power is used as a criterion of STR performance. It is shown that this power ratio equals the quality factor of the narrow bandpass filter and that it does not depend on the value of the delay element. The performance of the STR subsystem is consequently determined by the quality factor of the bandpass filter rather than by the specific delay. In addition to this, some experimental evidence that the additive channel noise has little effect on the power ratio is given. A modified phase-locked loop with an
LC
prefiiter is proposed to extract the symbol timing clock. This prefilter improves the acquisition and synchronization performance of the PLL. The STR technique presented here has the advantages of lower cost and simpler hardware implementation over other serial STR techniques.