Temperature Sensing Elements for Harsh Environments in a 4H-SiC CMOS Technology

The demand for accurate temperature sensing in extreme temperatures is increasing. Traditional silicon-based integrated temperature sensors usually cannot survive above 200 °C. Many researchers have started to focus on semiconductors with a large bandgap. Among them, silicon carbide (SiC) is the most promising one. Nevertheless, most reported SiC sensors are in the form of discrete components and are not compatible with integrated electronics. In this work, we demonstrate an open 4H-SiC CMOS technology, and the fabrication steps are detailed. The temperature sensing elements in this technology, including resistors based on different implanted layers and MOSFETs, are characterized up to 600 °C. At room temperature, the resistive-based elements demonstrate large negative temperature coefficients of resistance (TCRs). With increasing temperature, the TCR starts to decrease and even becomes positive. The TCR change is due to the interplay between increasing dopant ionization rate and decreasing mobility as a function of temperature. The resistance change with temperature fits well into the Steinhart-Hart model and second-order polynomial equation. The p-type diode-connected MOSFET has a sensitivity of 4.35 mV/°C with a good linearity. The nMOS-based sensor has a maximum sensitivity of −9.24 mV/°C but a compromised linearity. The characterization of these sensing elements provides important results for potential users who will work on SiC integrated temperature sensing with this technology.