Architecture design and ground performance of Netherlands-China low-frequency explorer

The Netherlands-China Low-Frequency Explorer (NCLE) (Boonstra et al., 2017, https://www.ursi.org/proceedings/procGA17/papers/Paper_J19-2(1603).pdf; Chen et al., 2020, https://ui.adsabs.harvard.edu/abs/2020AAS...23610203C/abstract) is a radio instrument for astrophysical studies in the low-frequency range (80 kHz–80 MHz). As a technology demonstrator, NCLE shall inform the design of future radio receivers that aim at low-frequency radio astronomy. NCLE can make observations at very high spectral resolution (<1 kHz) and generate radio sky maps at an angular resolution of ≈1.5 radians. NCLE uses three monopole antennas, each 5 m long, and three identical analog signal chains to process the signal from each antenna. A single digital receiver samples the signal and calculates the auto-correlated and cross-correlated spectra. The instrument's analog and digital signal chains are extensively configurable. They can be fine-tuned to produce broadband spectra covering the instrument's complete operating frequency range or sub-bands. NCLE was developed within a veryshort timescale of 2 years, and currently, it is on board Queqiao, the relay spacecraft of the Chang'e-4 mission, in a halo orbit around the Earth-Moon L2 point. This paper outlines the science cases, instrument architecture with focus on the signal chain, and discusses the laboratory measurements during the pre-launch phase.