Abstract:
The research provides insights into fabricating tall structures directly on optical fiber tips using two-photon polymerization 3D-printing. Various geometries were tested...Show MoreNotes: As originally submitted and published there was an error in this document. The authors subsequently provided the following text: "The research was funded by the joint Polish-Chinese SHENG 3 Grant, co-funded by National Science Centre, Poland (NCN 2023/48/Q/ST7/00242) and National Natural Science Foundation of China (NSFC 62361136584)". The original article PDF remains unchanged.
Metadata
Abstract:
The research provides insights into fabricating tall structures directly on optical fiber tips using two-photon polymerization 3D-printing. Various geometries were tested and the quality of the print was discussed. A structure with a height of 6 mm was successfully printed, establishing the current limit of on-fiber fabrication. The research also highlights functional tall devices fabricated with this method, such as photonic crystal fiber segments, axicons and lenses.
Notes: As originally submitted and published there was an error in this document. The authors subsequently provided the following text: "The research was funded by the joint Polish-Chinese SHENG 3 Grant, co-funded by National Science Centre, Poland (NCN 2023/48/Q/ST7/00242) and National Natural Science Foundation of China (NSFC 62361136584)". The original article PDF remains unchanged.
Date of Conference: 26-29 July 2024
Date Added to IEEE Xplore: 03 September 2024
ISBN Information:
Contents 