Combining Fault Simulation and Beam Data for CNN Error Rate Estimation on RISC-V Commercial Platforms

Thanks to the RISC-V open-source Instruction Set Architecture, researchers and developers can efficiently propose new solutions at a low cost and low power consumption. RISCV-based architectures can then be customized to run Machine Learning (ML) algorithms efficiently and inserted in safety and mission-critical domains, where the execution must be reliable. However, a fault in the hardware resources can compromise the system’s ability to operate correctly. Thus, it is necessary to characterize the ML applications’ vulnerabilities on RISCV processors and how errors in those operations impact the Convolutional Neural Network (CNN) misclassification rate. In this research paper, we assess the error rate induced by neutrons on the basic operations of a CNN running on a RISC-V-based processor (GAP8) and how each operation contributes to the entire CNN error rate. Our findings indicate that memory errors are the primary contributors to the system’s error rate. Furthermore, we present a case study demonstrating how the CNN microbenchmarks can be used to estimate the error rate of an entire CNN. By combining data from fault simulation and beam experiments, our error rate estimation led to a result that closely matches those obtained solely from beam experiments.