Co-Axial Slender Tubular robot (CAST): Towards Robotized Operation for Transorbital Neurosurgery with Minimal Invasiveness

Transorbital Neuro Surgery (TNS) offers a novel treatment towards the lesion inside skull pursuing minimal invasiveness. Most conventional TNS tools are rigid and straight, limiting the dexterity and accessibility in passing a small port. Bendable and steerable surgical tools provides an alternative for this issue. In this work, we proposed a dual-segment slender surgical robot arm for TNS, which is a Co-Axial Slender Tubular robot (CAST), and modelled it using novel approaches. Another contribution is tendon-mortise shaped slits along the axial direction, enhancing the overall stiffness. The bending of CAST is actuated by pushing/pulling distance, and the maximum diameter is only 1.7mm with high dexterity after mounting on a rigid robot arm. Experiments demonstrates that the proposed the slit design doubles the stiffness properties compared to traditional rectangle slit designs. The path-following task shows that the position error was maximally 3mm in open-looped control. Test on a skull model demonstrates that the whole system could successfully perform electrocoagulation procedure inside the depth of skull in a robotized manner effectively.