Design and Simulation of Data Acquisition system using Ethernet for Zynq 7000 SoC FPGA

Data Acquisition system using Ethernet for Zynq 7000 SoC FPGA, In autonomous vehicles, data transmission is essential for being reliable and for the efficient operation of the vehicle. In this project we are trying to implement the 10G Ethernet MAC for the data transmission. The Advanced Driver Assistance System (ADAS) in autonomous vehicles now uses CAN networks, which are not very reliable in today’s faster environment. The Ethernet is much faster than the CAN. Therefore, Ethernet is the protocol we’re employing to achieve this fast data transmission. Analog data is transformed into digital data and stored in FIFO in this data acquisition system. Ethernet is used to transfer the data that is stored for analysis and visualization. The simulation is the primary emphasis of this project. This simulation’s output is organized according to the IEEE 802.3 Ethernet standard. This Ethernet output will be of use in ADAS system for increasing the rate of transmission and reliability.