Timescale Graph-Parallel Computation and Mechanism Analysis of Economical Predictive Driving for Commercial Trucks

This paper proposed a timescale graph-parallel (GP) computation method to solve the real-time optimization problem of nonlinear predictive energy-saving control, thus to realize the implementation of MPC on vehicle on-board controllers. The proposed scheme consists of two parts: forward prediction of the objective function and backpropagation of the partial differential function, both of which can be calculated in parallel. Thus, compared with traditional serial solution method for optimization problems, the timescale graph-parallel computation method can utilize the computing resources of the controller fully. In this paper, firstly, based on the characteristics of commercial vehicles, a mixed integral optimal control problem (MIOCP) was constructed. Then, a detailed timescale graph-parallel computation algorithm was derived for the MIOCP. Finally, GP and Pontryagin’s Minimum Principle (PMP) algorithms were applied on the predefined road for the simulation of the prediction of energy-saving control for commercial vehicles. The simulation results showed that compared with PMP, the maximum iteration number, average iteration number, single longest solution time, and single average solution time of the proposed GP decreased by 60%, 64.28%, 89.53%, and 93.56%, respectively. In addition, GP can also improve fuel efficiency by 1.55% without sacrificing much power performance.