Optimization and Improvement of Tobacco Slice Machine Control System

In order to solve the problems of tobacco block jamming and discontinuity after cutting when tobacco blocks with different rules and characteristics enter the tobacco block slicer. Optimize and improve the hardware and algorithm control logic of tobacco slice machine, Firstly, in the hardware improvement of the slicer equipment, the skew detection device of tobacco block, the height monitoring device of tobacco block and the position detection of half pack cutter are added; Secondly, in the optimization and improvement of algorithmic control logic, the tobacco block skew or irregular equipment early warning and tobacco block slicer cutting mode are added, that is, the whole tobacco block cutting mode and the half tobacco block cutting mode. Through the verification of the effect of the optimized and improved tobacco slicer, 100 batches of materials were verified to be produced. There were 35 times of skewed or irregular tobacco blocks after improvement, 35 times of early warning, 0 times of failure, and 0 times of discontinuity after cutting.