InfiniteEn: A Multi-Source Energy Harvesting System with Load Monitoring Module for Batteryless Internet of Things

This paper presents InfiniteEn, a multi-source energy harvesting platform designed for the Internet of Batteryless Things (IoBT). InfiniteEn incorporates an efficient energy combiner to combine energy from different harvesting sources. The energy combiner uses capacitor-to-capacitor energy transfer to combine energy from multiple sources and achieves a nominal efficiency of 88 %. In addition to multiplexing different sources, the energy combiner facilitates the estimation of the harvesting rate and the calibration of the capacity of the energy buffer. The energy storage architecture of InfiniteEn employs an array of storage buffers that can be configured on demand to cope with varying energy harvesting rates and load's energy requirements. To address the challenge of tracking the energy state of batteryless devices with minimum energy overhead, this work introduces the concept of a Load Monitoring Module (LMM). InfiniteEn is a load-agnostic platform, meaning that it does not require any prior knowledge of the energy profile of the load to track its energy states. The LMM assists InfiniteEn in tracking the energy state of the load and dynamically modifying the storage buffers to meet the load's energy requirements. Furthermore, the module can detect and signal any abnormalities in the energy consumption pattern of the load caused by a hardware or software defect. Experiments demonstrate that LMM has a response time of less than 11 ms to energy state changes.