Comprehensive Diagnosis Strategy for Power Switch, Grid-Side Current Sensor, DC-Link Voltage Sensor Faults in Single-Phase Three-Level Rectifiers

Accurate fault detection and localization are essential for single-phase three-level (SPTL) rectifier systems with high reliability requirements. However, power switch faults, grid-side current sensor (CS) faults, and DC-link voltage sensor (VS) faults can all contribute to distorted output in the rectifier system, posing challenges for existing diagnostic methods tailored for single-type faults, as they struggle to distinguish between these various faults. Therefore, this study proposes a comprehensive diagnosis technology for open-circuit (OC) faults, CS faults, and VS faults of SPTL rectifiers on the basis of a reduced-order observer. To achieve this, the method begins by expanding and transforming the state equation of the rectifier with faults, ensuring complete decoupling of the OC fault vector from the initial system states and sensor faults. Subsequently, an assessment of the initial system state, CS faults, and VS faults is achieved via the design of a reduced-order observer. Using these estimation results, fault detection variable and its adaptive thresholds is designed, along with fault-distinguishing variables to differentiate between sensor faults and OC faults. Simultaneously, sensor fault identification method and OC fault location method are introduced. Finally, the validity and resilience of the comprehensive diagnostic approach are confirmed through hardware-in-the-loop (HIL) test results under diverse scenarios.