Ladder-Type Resonant Switched-Capacitor Converter Achieving 99.1% Peak Efficiency and 4750 w/in3 Power Density for High-Current Application

A nonisolated fixed-ratio resonant switched-capacitor converter (RSCC) with high peak efficiency and high power density is encouraged as intermediate bus converter. With higher input voltages, stacked topologies achieve better component stress, but the relative current stress will be multiplied, e.g., ladder and Cockcroft–Walton topologies are not well suited for high-power high step-down ratio applications. Accordingly, in this article, a ladder-type RSCC is proposed to meet high current demands by combining symmetrical auxiliary resonant tanks with two interleaved phases. In addition to having a high-resolution scalability that satisfies any integer conversion ratio, the voltage stress on the flying capacitors does not increase significantly as the conversion ratio increases, making their capacitance minimally susceptible to component tolerances. Meanwhile, all
mosfet
s are always well clamped at 1× output low-voltage level, which means that low-voltage devices are permitted to be used, resulting in a good factor of merit. By combining adaptive constant on-time with dead-time modulation, an effective duty cycle is optimized, and controlled current sharing is achieved, making multistage parallel expansion very flexible and efficient. To demonstrate the feasibility and practicality, a compact 3-to-1 hardware prototype was realized with a load current of up to 75 A, resulting in an excellent power density of 4750 W/in3. A peak efficiency of 99.1% and a full-load efficiency of 98.1% were also achieved.