Research on Multi-Information Dynamic Identification Monitoring Method Based on Active RFID

The current information identification monitoring methods mainly use barcode and other carriers to realize the static identification monitoring, for the multi-information dynamic identification error and unit efficiency will be affected by the carrier reading rate and other factors, the practical application is limited. In order to improve the defects of current information identification monitoring methods, a multi-information dynamic identification monitoring method based on active RFID will be studied. After collecting the model parameters of RFID chip, a multi-dimensional information evaluation model is established. The evaluation results are output to determine the optimal chip and identification dynamic parameter monitoring standards, control the identification dynamic reception in RFID time slot, and realize the monitoring of multi-information identification. Through experimental research, the monitoring method of active RFID reduces the relative error greatly, shortens the time cost by nearly 20%, and has higher credibility in practical application.