CNN-Based Camera Pose Estimation and Localization of Scan Images for Aircraft Visual Inspection

General Visual Inspection is a manual inspection process regularly used to detect and localise obvious damage on the exterior of commercial aircraft. There has been increasing demand to perform this process at the boarding gate to minimise the downtime of the aircraft and automating this process is desired to reduce the reliance on human labour. Automating this typically requires estimating a camera’s pose with respect to the aircraft for initialisation but most existing localisation methods require infrastructure, which is very challenging in uncontrolled outdoor environments and within the limited turnover time (approximately 2 hours) on an airport tarmac. Additionally, many airlines and airports do not allow contact with the aircraft’s surface or using UAVs for inspection between flights, and restrict access to commercial aircraft. Hence, this paper proposes an on-site method that is infrastructure-free and easy to deploy for estimating a pan-tilt-zoom camera’s pose and localising scan images. This method initialises using the same pan-tilt-zoom camera used for the inspection task by utilising a Deep Convolutional Neural Network fine-tuned on only synthetic images to predict its own pose. We apply domain randomisation to generate the dataset for fine-tuning the network and modify its loss function by leveraging aircraft geometry to improve accuracy. We also propose a workflow for initialisation, scan path planning, and precise localisation of images captured from a pan-tilt-zoom camera. We evaluate and demonstrate our approach through experiments with real aircraft, achieving root-mean-square camera pose estimation errors of less than 0.24 m and 2
$^\circ$
for all real scenes.