Enhanced Field of View for Resonant Beam Systems in IoT Applications

Simultaneous lightwave information and power transfer (SLIPT) is increasingly vital in the burgeoning field of mobile Internet of Things (IoT) technologies. It offers a dual advantage: high-power wireless charging and high-rate data communication, essential for IoT devices. Resonant beam system, utilizing spatially separated laser resonators (SSLRs), presents a promising solution. These systems enable the creation of resonant beams without necessitating beam steering devices or alignment/tracking processes, even when the receiver’s location changes. However, a critical challenge in deploying these systems within IoT scenario lies in their limited Field of View (FoV) and coverage angle. In this article, we present a design strategy for integrating concave mirrors with lenses in a cat’s-eye retro-reflector configuration. This adjustment significantly enhances the FoV of the resonant beam SLIPT system, resulting in more efficient and broader system coverage. Through an analysis grounded in optical field propagation, we evaluate the FoV performance of the resonant beam SLIPT system. The numerical results show that with a retro-reflector dimension of 2.5 mm, our proposed system demonstrates the capability of conducting watt-level electrical power transfer, coupled with a communication capacity of approximately 10 bit/s/Hz under a 6.87° FoV. This substantial improvement in FoV not only addresses the current limitations but also provides new avenues for resonant beam SLIPT systems in a wide range of IoT applications.