Test System Designing for Damping Control Unit

The automotive sector, particularly four-wheelers, is important to transportation in the modern world. The suspension system is what provides a smooth ride in a car.It is very important to test the suspension system, especially the damping control unit. PTS (Product Test Specifications) generation is one of several stages in the testing procedure for the electronic control unit (ECU). The communication interface and power supply were then put through functional and compatibility testing at the bench level. Microsoft Visio is used to construct the wiring and load box, and the LauterBach Debugger is utilized to carry out the flashing loading and upload the memory mapping to the ECU. The Embedded Test Specification (ETS) was subsequently created using the PTS in TestExec SOftware. Henceforth, the implementation of the data protection step using cyber security concept. The Venturi tester is used for the testing of the ECU. The calibration test for damping valves, the hot test, the cold test, and the short current measurement have been completed.