Potential Use of Cathode Ray Tube as an Abrasive Particle in Abrasive Jet Machine

The growth of the electronic industries have developed in recent decades to make more electronic items as the demands increases which lead to disposal of non-bio degradable waste. This causes environmental pollution and harmful effect to human being and animals. In this project, the abrasive particles used in the abrasive jet machining process are made from repurposed e-waste. For this idea, the flow analyses of nozzle are finding from the research on various published papers. Based on research the nozzle is fabricated. Further, the e-waste like CRT and using sieving and segregated methods, monitors are gathered and reformed into abrasive particles. The mixing chamber is constructed, and the abrasive particles and dry air are mixed inside. Then, through the outlet opening, the mixed particles are forced to flow out into the working chamber. As a result, in the abrasive jet machining process, a targeted stream of abrasive particles is accelerated through a nozzle at a high velocity stream to machine the glass materials. Furthermore, the abrasive particle performance parameters of the abrasive jet machining process are assessed.