DOI- and TOF-Capable PET Array Detector Using Double-Ended Light Readout and Stripline-Based Row and Column Electronic Readout

We investigate a highly multiplexing readout for depth-of-interaction (DOI) and time-of-flight PET detector consisting of an
$N\times N$
crystals whose light outputs at the front and back ends are detected by using silicon photomultipliers (SiPMs). The front
$N\times N$
SiPM array is read by using a stripline (SL) configured to support discrimination of the row position of the signal-producing crystal. The back
$N\times N$
SiPM array is similarly read by an SL for column discrimination. Hence, the detector has only four outputs. We built
$4\times4$
and
$8\times8$
detector modules (DMs) by using 3.0-mm
$^{3}\,\,\times3.0$
-mm
$^{3}\,\,\times20$
-mm3 lutetium-yttrium oxyorthosilicates. The outputs were sampled and processed offline. For both DMs, crystal discrimination was successful. For the 4
$\times $
4 DM, we obtained an average energy resolution (ER) of 14.1%, an average DOI resolution of 2.5 mm, a non DOI-corrected coincidence resolving time (CRT), measured in coincidence with a single-pixel reference detector (refDet), of about 495ps. For the 8
$\times $
8 DM, the average ER, average DOI resolution and average CRT were 16.4%, 2.9 mm, and 641ps, respectively. We identified the intercrystal scattering as a probable cause for the CRT deterioration when the DM was increased from 4
$\times $
4 to 8
$\times $
8.