A Control Strategy for Solid-State Transformers With Coupled Load Disturbance Attenuation Ability

The architecture of solid-state transformers (SSTs) is usually comprised with three-stage cascaded converters. The control of cascaded multistage SSTs is conventionally designed considering decoupled stages. Furthermore, the isolating stage, which is typically implemented with dual active bridge converters, employs a closed-loop control with a much larger bandwidth (BW) than the ac–dc stage. This disparity in the BWs can put a strain on the intermediate dc-link capacitors that connect the ac–dc and isolating stages, resulting in large capacitor voltage excursions when the load changes. In fact, this can result in ac–dc stage overmodulation and even large current overshoots through the isolating stage's high-frequency transformers. This necessitates advanced SST control strategies that can mitigate the aforementioned challenges. This article proposes a control design in which the state variables are selected as the sum of capacitor energies and differences in capacitor energies. Unlike the state-of-the-art SST controllers, the proposed integrated control approach creates a more balanced and safe distribution of energies among the dc-link capacitors during load transients. The control design is simplified as the difference in the control-loop BWs between the stages does not affect this disturbance attenuation ability. The effectiveness of the proposed control is demonstrated by experiments using a 1-kVA SST with two strings.