A Scalable Dynamic TOT Circuit for a 100 ps TOF-PET Detector Design to Improve Energy Linearity and Dynamic Range

This article focuses on adapting linearization strategies for annihilation photon energy measurement for a time-of-flight (TOF) positron emission tomography (PET) system that achieves
$\sim 100$
picosecond (ps) full-width at half maximum (FWHM) coincidence time resolution (CTR). We have adapted the method of dynamic TOT (DynTOT) for our scalable TOF-PET detector readout electronics to linearize the energy spectra while maintaining
$\sim 100$
ps FWHM CTR. The linear response of the resulting DynTOT circuit facilitates improved energy performance compared with conventional time-over-threshold (TOT). Our detector design has the capability to position the 3-D coordinates of one or more 511-keV photon interactions. To facilitate this goal, DynTOT’s linearity across the entire energy range enables accurate measurement of low-energy interactions that is required for more accurate positioning of intercrystal scatter events. This DynTOT block is implemented by off-the-shelf discrete components and consumes only 11 mW power per detector layer unit design comprising 24:1 multiplexed energy and timing channels. We first validated the performance of DynTOT using single
$3\times 3\times10$
mm3 LGSO scintillation crystals side-coupled to arrays of three
$3\times3$
mm2 SiPMs which achieved 511-keV photopeak energy resolutions of 13.6 ± 0.4%, 13.0 ± 0.8%, and 17.1 ± 0.6% for conventional pulse height, DynTOT, and conventional TOT methods, respectively. Then, we stretched by roughly 7-fold the DynTOT digital pulses (energy) generated from side-coupling
$2\times4$
array of
$3\times 3\times10$
mm3 crystals to 24 SiPMs, and achieved 511-keV photopeak energy resolutions of 11.8 ± 0.7% with a dynamic range from less than 60 to 1274 keV, making that suitable for methods of accurate 3-D positioning of intercrystal-scatter interactions. Moreover, CTR with a highly multiplexed timing circuit was measured using these extended DynTOT pulses for energy gating, resulting in an average 108 ± 1.3 ps FWHM CTR.