Minkowski Based Microwave Resonator for Material Detection over Sub-6 GHz 5G Spectrum

This paper describes the performance of a low-cost, high-sensitive microwave resonator for 5G modern wireless communication systems operating through sub-6GHz spectrum. Here, the proposed resonator is constructed from a Minkowski fractal open stub that is coupled to an interdigital capacitor. It is fetched to a circular spiral inductor structure with a back loop to increase the resonator quality and it operates at a frequency resonance of 524 MHz. Since the purpose of the study is to apply such technology to characterize liquid properties, the presented resonator is mounted on an FR4 substrate with a thickness of 1.6 mm and an area of
$40\times 60$
mm2, Using CST MWS commercial software, the resulting design dimensions are optimized. The proposed design performance which is demonstrated in terms of
$\mathrm{S}_{21}$
magnitude is found to vary significantly by the variations in the photo-resistor. Such a property motivated the authors to consider it for material detection as the frequency stability with a photo-resistor value change is relative to the light incidence. In such a manner, the achieved results are found to behave linearly without discrepancy due to the effects of diffraction from the resonator layers. This technology is frequently used as a strong contender for a variety of contemporary wireless technologies that may invoke optical-based interface systems.