Electro-Optical Control and Readout of Superconducting Devices

Quantum computing is a rapidly evolving field with potential for solving complex problems beyond the reach of classical computers. Scalability in qubit design and signal processing architecture within cryostats is necessary for taking advantage of quantum computing's potential. Current state of the art qubit technology requires both a feed and readout line for each qubit within a quantum processor, with these lines generally being metallic coaxial cables. For stainless steel cables this represents a significant heat load into the cryostat. An alternative approach involves using optical fibers for signal transmission, as optical fibers have a thermal conductivity two orders of magnitude lower than stainless steel coaxial cables. The proposed method for optical signal transmission relies on electro-optic modulation, where a voltage applied to an electro-optic material changes its refractive index, allowing for a controllable phase change to be applied to any light passing through the material. This concept can be combined with on-chip photonic waveguide technology to build fiber-coupled phase modulators as well as intensity modulators using on chip interferometers. The proposed architecture uses a room temperature intensity modulator to encode microwave signals onto a laser signal, which is recovered at cryogenic temperatures using a photodiode and used as input for a device under test. The output of the test device is encoded onto light using a phase modulator and recovered at room temperature through interferometry. Proof-of-concept experiments have been carried out at room temperature, including noise characterization and preliminary tests of components at cryogenic temperatures.