An Unbalanced Capacitor Voltage Buck Converter With Wide Soft Switching Range

DC–DC converters using soft switching technology have gained popularity in several industrial applications. Nevertheless, a wider soft switching range and a simpler structure are the holy grail for these converters. In this article, an innovative unbalanced dc-link capacitor voltage buck converter with a broad soft switching range has been proposed. The converter uses an auxiliary switch and a small inductor to create an auxiliary network that enables zero voltage switching (ZVS) for the buck switch. The auxiliary switch turns
on
under zero current switching, whereas the main buck switch operates under ZVS with reduced
dv
/
dt
. Unbalanced voltage of a series-connected dc-link capacitor is intended to boost the soft switching range of the buck converter for a broad range of loads by lowering the resonant voltage to less than half the input voltage. LTspice simulations of the converter operating with a power load of 1 kW and a switching frequency of 100 kHz have been demonstrated and the efficiency of the topology based on silicon carbide MOSFET has been discussed. Compared with the traditional hard switching buck converter, the proposed converter reduces total losses by 50% and improves the light-load efficiency to 91.3% from 88.5% and the full-load efficiency to 97.5% from 94.5%. Finally, a 1 kW prototype has been designed and tested to validate the theoretical ideas including the closed-loop control strategy for the converter.