Effect of cladding layer thickness on the performance of GaAs-AlGaAs graded index separate confinement heterostructure single quantum-well lasers

The thinning of cladding layers of GaAs-AlGaAs graded index separate confinement heterostructure single quantum-well (GRINSCH-SQW) lasers offers several advantages. These advantages include easier fabrication of surface grating-based lasers and ridge lasers, the reduction of growth time and source-material use, and the more effective removal of heat due to lower thermal resistance. Experimental results from GRINSCH-SQW lasers showing that typical cladding thicknesses of 1.5 to 2 mu m are much thicker than necessary are presented. Lasers with cladding layers as thin as 4500 AA have not shown any increase in threshold current. Theoretical analysis shows good agreement with the experimental results on the minimum cladding thickness necessary to prevent an increase in the threshold current. The differential quantum efficiency is theoretically considered and is found to be more sensitive to cladding-layer thickness.<
>