Research on Adaptive Fault Diagnosis Control System of Audio Management Component Environment of Airborne Electronic Equipment

The system adopts adaptive control, and the controller of audio management component is directly applied to the controlled object. Through online calculation, the model is identified online by using the dynamic characteristics of the object, and the relationship between input and output variables is expressed. It can be corrected by entering and leaving data, which is actually to correct the controller. The initial rules of the controller are composed of default models. Through continuous self-reasoning learning, the controller is optimized to achieve data tracking, fast convergence, strong anti-interference ability and excellent performance. Combining intelligent control with adaptive technology not only expands the scope of adaptive system, but also provides an effective way for intelligent control. The environmental adaptive diagnostic control system uses adaptive technology to adjust the parameters, data and knowledge base of the controller. The system detects IO signal, AD signal and the status data sent by the sub-unit through the internal CAN bus according to the power-on self-check of the unit, and at the same time, it monitors all the status data in real time during the operation, judges the operation of each sub-component, gives an alarm in time and carries out protection control. Through the design of integrated detection module, the overall installation space of detection sensors is reduced, signal interfaces and connecting cables are reduced, and the overall adaptive diagnosis effect can be improved. Through the data recording and storage function, the system stores the operation information of each subunit, compares it with the built-in health data table, and prompts the maintenance information in time.