Development of a Non-Cloggable Subsea Data Logger for Harsh Turbidity Current Monitoring

Large submarine flows of sediment (sand and mud), known as turbidity currents, transfer and bury significant amounts of organic carbon and pollutants to the deep sea via submarine canyons. They are also significant geohazards, regularly breaking networks of seabed telecommunications cables that carry > 99% of global data that underpin the internet. Despite this, key parameters (notably their sediment concentration) in these flows are yet to be directly measured in real-time due to their inherently harsh environment that is unsuitable for commercial conductivity sensors. To address this issue, a subsea datalogger (SSDL) is developed with a planar conductivity sensor head that can measure the sediment concentration within dense turbidity currents. Unlike conventional sensors, the planar design of the SSDL’s sensor prevents clogging at high sediment concentrations, allowing for continuous measurements within turbidity currents. The conductivity sensor is developed with a temperature sensor which is measured using an external 16-Bit ADC which is controlled with a SAMD21 32-Bit ARM microcontroller. The SSDL measures the temperature and the conductivity of the seawater once every 4 seconds for over a year. In an initial device test, the SSDL can record a turbidity current within the Bute Inlet, Canada. It is found that the seawater’s conductivity increases with salinity concentration and decreases with sediment concentration. The SSDL developed here can thus be used for both conventional subsea datalogging applications and high turbidity current applications.