Mapping biotic and abiotic seafloor habitat characteristics with multi-spectral multi-beam backscatter data

Detailed knowledge of both the sedimentological and ecological characteristics of the seafloor is essential when undertaking bottom-disturbing activities, but can be a challenge to obtain. Through backscatter data at different frequencies, collected with a multi-spectral multi-beam sonar, information on the structure of both the sediment surface and subsurface, and potentially also on the presence and distribution of benthic organisms, can be derived. We conducted two surveys at sea in summer 2021, in which we used an R2Sonic 2026 multi-spectral multi-beam sonar in the southern North Sea. Boxcore samples were taken to gather information on macrobenthos densities and sediment characteristics. The two studied areas were found to differ in seafloor morphology and correspondingly in the composition of the sediment composition and benthos distribution. Backscatter strength was used to classify the seafloor via the Bayesian method and via hierarchical clustering of angular variation. Relationships between the classification results for three frequencies and sediment and ecological variables were studied through redundancy analysis (RDA), for which hierarchical clustering of the angular variation in backscatter strength showed a higher model fit than Bayesian classification. We found that the density of the sand mason worm Lanice conchilega and percentages of dead shells, gravel and sand contributed most to the backscatter-based classification, with lower contributions of the percentages of mud and living bivalves. Our results suggest that acoustic backscatter can be used to delineate distinct seafloor regions, corresponding with concurrent gradients in ecological and sedimentological variables.