Optimized Rewinding of Oversized Induction Motors

When an oversized and/or faulty three-phase squirrel-cage induction motor (SCIM) needs to be rewound, there is an opportunity to redesign its stator winding as a function of its actual load cycle, aiming at improving its efficiency, power factor, and reliability. This paper proposes a systematic methodology to optimize the stator winding of in-operation, line-operated, fixed-speed SCIMs, with two goals, namely, (i) optimization of the fundamental component of magnetizing flux to the actual load cycle, reducing the original core saturation level and nominal power of the motor, and (ii) optimization of the pitch and turns of the coils to minimize the winding copper losses and the airgap magnetomotive force harmonic content. Hybrid computing approaches using the first principles and nondeterministic methods can be used for winding optimization. The proposed methodology has been applied to three oversized 5.5 kW, 4-pole SCIMs, driving industrial ceramic paste mixers, and led to a 30-45% reduction in the line current, a 10-25% reduction in the input active power, and a 20-35% increase in the power factor, enabling an upgrade of the efficiency class from "IE0"/IE1 to IE3/IE4. The decrease of the motor line current reduces the Joule losses in the upstream cables and transformers, freeing power transmission capacity in the power supply network. The proposed strategy is a cost-effective alternative to the replacement of old oversized motors with new well-sized motors, avoiding mechanical readaptation of the fixing and coupling systems and allowing for higher efficiency and power factor levels than those of new well-sized motors. It also fosters copper recycling, the electric motor circular economy, and the local economic activity associated with the motor repair/rewinding sector.