Synchronization Device of the Specialized Source of Synchrotron Radiation «Sibir-2» of the Kurchatov Institute

The purpose of the work is to design a schematic diagram and develop a printed circuit board, develop configuration for fpga of the injection and synchronyzation control unit for the specialized source of synchrotron radiation «Sibir — 2» of the Kurchatov Institute. According to the modernization plan the Main storage ring Sibir-2 and Booster ring RF System will operate on the same frequency of 181.139 MHz. In this connection it is required to create a control unit for synchronization of injection of electron bunches from the electron gun to Booster with an accuracy of 0.2 ns and from any separatrix of Booster into any separatrix of the Main ring; to form «Pre-Start» and «Solution» pulses which are required for synchronization of «slow» deflection systems for injection. As a result, a printed circuit board and internal fpga logic was designed according to the design specification. Measurements showed that the device meets the basic requirements.