A Model-Data Compound Driven Method For Compensating Robot Tracking Error

Industrial robots are widely used in industrial production because of their high work efficiency and high flexibility, but their low tracking accuracy makes them unable to be applied on a large scale in high-precision manufacturing. Considering the modeling error of robot, the problem of low tracking accuracy should be solved by combining model-based methods and data-based methods. Thus, a model-data compound approach is proposed for compensating robot tracking error. This method comprehensively considers two error compensation methods of model-driven and data-driven, which constructed the input matrix by using the model-based information and the data-based information. The former includes the desired position, velocity, acceleration, torque and friction torque; and the latter includes the actual torque. For the purpose of predicting the correlation between the joint error and the historical joint motion state, the historical information of the joint motion is also added in the input matrix for improving the error prediction accuracy. Then, a convolutional neural network prediction model is constructed for predicting and compensating the tracking error of each actuated joint. The experimental results show that the proposed method has good prediction accuracy and compensation effect. Compared to joint control without using the proposed method, the root mean square of joint tracking errors was reduced by up to more than 69%.