Results of the model coil tests for the cable-in-conduit conductor for SST-1 tokamak

SST-1 tokamak, under fabrication at Institute for Plasma Research (IPR), India, deploys superconducting coils for both toroidal field (TF) and poloidal field (PF) magnets. A NbTi based 135 strands cable-in-conduit conductor (CICC) has been fabricated for this purpose by M/S Hitachi Cable Ltd. (Japan) under specification and supervision of IPR. In order to test the performance of this CICC under SST-1 operating scenarios, a Model Coil (MC) has been designed, fabricated and tested at Kurchatov Institute (KI), Russia using the SST-1 CICC under a collaborative program between IPR and KI. The MC was designed to have the same maximum field-to-current ratio (5 T at 10 kA) as of the SST-1 TF coils. Typical SST-1 disturbances were simulated with a toroidal array of four longitudinal disturbances simulating coils and with two transverse disturbances simulating coils.