Miniaturization of a Fully Metallic Bandpass Frequency Selective Surface for Millimeter-Wave Band Applications

This article presents a miniaturized all-metallic bandpass frequency selective surface (FSS) for millimeter-wave (mmWave) applications. The designed FSS is realized as a slot-type element that can be easily incorporated into all-metallic device architectures. The miniaturization is achieved by a convoluted or meander slot structure, i.e., a miniaturization technique borrowed from conventional substrate-based FSS design. It is demonstrated that the proposed FSS element provides a stable and wide bandpass performance from 24.9 to 31.4 GHz for both the transverse electric (TE) and the transverse magnetic (TM) polarizations at the broadside direction (
$\theta = 0^{\circ }$
). Adequate performance is maintained at oblique incidence angles up to
$\theta = \pm \,45^{\circ }$
. A 25 × 25-elements FSS array prototype has been manufactured using the cost-effective chemical etching technique and experimentally characterized utilizing a free-space measurement setup. The results demonstrate a remarkably good correlation between simulations and measurements. Hence, the proposed miniaturized FSS represents an excellent potential to realize an all-metallic FSS with low insertion loss, low profile, and wideband performance at low fabrication costs for mmWave applications.