Compton Camera Arrangement With a Monolithic LaBr3(Ce) Scintillator and Pixelated GAGG Detector for Medical Imaging

The results presented in this manuscript are divided in two main parts. The aim of the presented work is to conduct feasibility tests on a Compton camera setup to be later scaled up and used for PET and triple coincidence
$\gamma $
-PET purposes. The first part is focused on laboratory characterization of a monolithic LaBr3(Ce) scintillator coupled to a 64-channel multianode photomultiplier (H8500C PMT from Hamamatsu) in combination with a well-established algorithm allowing to determine the interaction’s position resolution. The second part of the article is dedicated to the evaluation of a Compton camera detector arrangement in which the monolithic scintillator acts as an absorber, while a pixelated GAGG scintillator array, read out by a SiPM multipixel photon counter (MPPC), is used as a scatterer component. The accuracy achievable with this system for detecting
$\gamma $
rays from laboratory point sources is investigated. The Compton camera system has been tested with radioactive 137Cs and 60Co point sources. The signal readout and data acquisition system is based on individual spectroscopy electronics modules (NIM and VME), for the absorber and a customized electronics based on Anger logic for the GAGG scatter array. The raw data were analyzed to serve as input for the image reconstruction, performed using the MEGAlib toolkit software. With a spatial resolution of 1 mm for the scatterer and less than 3 mm for the absorber component, respectively, shifts of 2 mm of both radioactive sources
$(^{137}$
Cs and 60Co) could be resolved with the whole Compton camera system.