Microgrid Building Blocks: Concept and Feasibility

For power grids with high penetration of distributed energy resources (DERs), microgrids can provide operation and control capabilities for clusters of DERs and load. Furthermore, microgrids enhance resilience of the hosting bulk power grid if they are enabled to serve critical load beyond the jurisdiction of the microgrids. For widespread deployment of microgrids, a modular and standardized Microgrid Building Block (MBB) is essential to help reduce the cost and increase reliability. This paper proposes the conceptual design of an MBB with integrated features of power conversion, control, and communications, resulting in a systemwide controller for the entire microgrid. The results of a feasibility study indicate that, in a utility-connected mode, MBB-based microgrids can exchange power with the hosting power grid while serving regulation and optimal dispatch functions. In a resiliency (islanded) mode when the microgrid is disconnected from the utility system, the MBB control system acts to stabilize the system frequency and voltage under small or large disturbances. The microgrid controller is supported by a communication system that meets the latency requirements imposed by the microgrid dynamics as well as data acquisition time. The extended IEEE 13-node system is used as a microgrid model to validate the proposed MBB design and functionality.