Double Polling-Based Tag Information Collection for Sensor-Augmented RFID Systems

The significance of RFID-based information collection is becoming increasingly visible as more and more sensor-augmented RFID systems are deployed. Tag information collection aims at efficiently and accurately collecting valuable information from target objects attached with RFID tags. Polling-based information collection can effectively avoid response collisions between RFID tags, and it is widely adopted to accurately inventory tags. However, in the traditional polling mode, a polling vector can only be used to query a tag at a time, which is inefficient. In this paper, we design a double polling mode to improve the utilization of polling vectors, which can simultaneously interrogate a pair of tags. Afterwards, several techniques are developed to reduce the polling vector length. First, the Basic Double Polling-based protocol (BDP) employs double indexes to collect information, which greatly reduces the number of polling vectors. Second, the Segmented Double Polling-based protocol (SDP) divides the double indexes into several segments to cut the polling vector length down. Third, the Partial Double Polling-based protocol (PDP) replaces the double index with the size of the empty segment between two adjacent non-zero indexes to further reduce the average polling vector length. Finally, the Differential Double Polling-based protocol (DDP) utilizes the size of the empty segment between two double indexes to improve the utilization of polling vectors. After that, extensive theoretical analyses and simulations are conducted, which demonstrate the feasibility and effectiveness of the proposed protocols.