A Novel Optimal Voltage Vector Selection Control Strategy for Vienna Rectifier

At present, model predictive control (MPC) is widely used in power electronic converters. The objective function is typically utilized to select the optimal voltage vector, but the switching frequency is not fixed or too high during the selection process. Therefore, to address this issue, a novel optimal voltage vector selection control strategy for Vienna rectifier is proposed in this paper. Specifically, hysteresis link is introduced into finite control set-model predictive direct power control (FCS-MPDPC). The optimization criterion is changed from the traditional objective function tracking error minimization to the longest extension step in the hysteresis loop. As a result, the switching frequency can be reduced and the control algorithm can be simplified by redefining the optimization criteria of the rectifier output voltage vector. Moreover, according to the power control model of Vienna rectifier, three-level space vector pulse width modulation (SVPWM) is used to generate the switching function for the next cycle. Finally, an experimental platform for Vienna rectifier based on dSPACE hardware is built to verify the feasibility of the proposed strategy. Experimental results show that the control strategy can ensure the rectifier to run normally and exhibit good steady state performance.