Thermal transport properties of gold-covered thin-film silicon dioxide

The performance and reliability of electronic devices composed of multiple thin layers of material are highly dependent on effective thermal management. Since the thermal properties of thin films, such as SiO/sub 2/, can vary considerably from bulk values, the determination of those properties is critical for the purposes of design. A new transient thermo-reflectance system has been employed to measure the thermal characteristics of thin-film SiO/sub 2/ layers. Results show that for layers of SiO/sub 2/ in the range of 100-1000 /spl Aring/, the intrinsic thermal conductivity is independent of thickness and smaller than the traditionally reported value of bulk silicon dioxide (1.4 W/m-K). The intrinsic value was measured to be around 90% and 75% of this bulk value for thermally grown (TG) and ion beam sputtered (IBS) oxides, respectively. The thermal interface resistances of TG and IBS SiO/sub 2/ films were measured at 1.68 /spl times/ 10/sup -8/ m/sup 2/-K/W and 2.58 /spl times/ 10/sup -8/ m/sup 2/-K/W, respectively. If a chromium film of around 100 /spl Aring/ is deposited between the gold and SiO/sub 2/ layers, the interface thermal resistance improves to 0.78 /spl times/ 10/sup -8/ m/sup 2/-K/W for TG films and 1.15 /spl times/ 10/sup -8/ m/sup 2/-K/W for IBS films. Thus, the effective thermal resistance of SiO/sub 2/ thin-films (i.e., with interface effects) is up to one order of magnitude smaller than the values reported for bulk SiO/sub 2/.